JTest Posted October 18, 2009 Author Share Posted October 18, 2009 G'day The weather has again turned too cold to work without heat in the hanger. I have picked-up where I left off on Chapter 11 in the warm room. I installed the elevators and drilled the canard for the NC-3s and NC-3As. I took a couple of pictures of the layup after the flox was put into the openings to hold the elevators. I welcome constructive comments... Thanks for looking; Jeff Quote Link to comment Share on other sites More sharing options...
JTest Posted December 29, 2009 Author Share Posted December 29, 2009 G'day I got back from a month in Oz and managed to get to the hanger over the Christmas weekend. I covered the canard tips tops. I have a couple of pictures. Jeff Quote Link to comment Share on other sites More sharing options...
JTest Posted December 29, 2009 Author Share Posted December 29, 2009 G'day I also managed to start the nose. I used a belt sander to sand the foam to shape. I have some pictures of the solid foam nose. Then I took a hand saw and cut out the inside... I have a few pictures also. I welcome any constructive comments or ideas. Thanks for looking and Happy Holidays! Jeff Quote Link to comment Share on other sites More sharing options...
mfryer Posted December 29, 2009 Share Posted December 29, 2009 Where is the nose gear assembly?? Quote Link to comment Share on other sites More sharing options...
JTest Posted December 29, 2009 Author Share Posted December 29, 2009 G'day I have the nose gear assembly sitting under the warm room work bench. I needed to get the Canard out before I can move the Tub into the room due to space issues. Yes, I know I did the last part of the Chapter first.... I may regret it I know, but it was also kind of fun to see what it will look like... I wanted to work on cold area stuff (hanger temps around 40 degrees F) so I worked on the nose shell. Yeah, I may need to make some mods to it, but it is only foam and easy to work with. I hope to get the gear installed in the New Year! Cheers! Jeff Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.