AusEracer Posted October 2 Share Posted October 2 Hi all, Looking for suppliers that can cut the wing and Canard foam. Any suggestions? Also based on what I have read in this forum there is a vast array of foam available. Is that something I would need to specify or would the supplier who makes up the pre-cut kit aware of the specifications? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
zolotiyeruki Posted October 2 Share Posted October 2 What you're looking for is https://eurekacnc.com/ The plans specify which kind of foam to use in various locations. The type of foam is quite important--you don't want to use styrofoam when constructing the fuel strakes, for example. http://www.aryjglantz.com/p/blog-page.html?m=0 <- Ary Glantz has a ton of info on the materials and plans and such. Some of the foams are manufactured in somewhat different thicknesses and/or densities than they were a half century ago, so some adjustments are necessary. Quote Link to comment Share on other sites More sharing options...
AusEracer Posted October 6 Author Share Posted October 6 Thanks Ammon, much appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.